Delta King Semi-Hollow Electric Guitar

The Delta King concept is to provide fuller, more balanced tonality than available in a standard semi-hollow guitar.  The core and neck laminate design is key to both the guitar’s brilliance and warmth, in addition to the sonic qualities of the big ’59 neck carve.  For added acoustic quality, the XL model increases the chamber size for enhanced bottom end response, great for Jazz.  The Delta King is a fully handmade guitar for the ages, with unmatched tone and playability.  All V16 guitars come with a lifetime workmanship guarantee.

Body Options  

Body Size:  Choice of standard 16” or extra-large (XL) 17” semi-hollow (add $500).

Shell Wood:  Choice of clear maple or curly maple (add $150) ply top, back, & sides.

Core Wood:  Standard 3 ¾” wide 5-ply core of quarter-sawn rock or soft maple, purple heart, and Honduras mahogany or traditional core of 4”wide rift-cut soft maple sandwiched between serrated layers of Honduras mahogany.

Binding: Comes standard double-bound with choice of single layer ABS cream or grained “Ivoroid” celluloid plastic. Wood binding (add $800). ABS or grained “Ivoroid” celluloid plastic F-hole binding (add $150).


Neck Wood:  Choice of standard 5-ply quarter-sawn rock or soft maple, purple heart, and Honduras mahogany or traditional 1-piece quarter-sawn Honduras mahogany (add $250).

Carve:  Standard big ’59 C-carve, .87” at the first fret, and .92” at the 12th fret.  Other carves available upon request.

Fretboard:  Choice of standard Indian rosewood, Brazilian rosewood (add $200), or ebony (add $75)

Scale:  25”, 22 Frets

Radius:  12”

Headstock Pitch:  14 degrees

Frets:  Standard jumbo, or customer can choose at will at no extra charge.  No stainless steel.

Binding:  Grained “Ivoroid”, plain cream, or wood (add $50 for all).

Nut Material:  Bleached or unbleached cow bone.

Inlays: Standard MOP (yellow or white) dots.  Available hand-inlayed MOP/abalone “V’s” (add $500).

Electronics & Hardware

Pickups: Two hand-wound, wax-potted V16 “777” humbuckers made with butyrate plastic bobbins, nick-silver baseplates, and maple spacers . Approximate output – 7.77k ohm, choice of Alnico A2-A5 magnet.

Pickup Rings: Black or cream butyrate plastic, or hand-shaped figured maple (add $75).

Controls:  Two volume and two tone CTS 500K audio taper pots with optional resistor/capacitor networks (keeps frequency band when turning down volume, add $25), Switchcraft 3-way selector, Switchcraft output jack.  Push-push or push-pull coil tap available (add $25 per).

Hardware:  Choice of Bigsby B7 or B12 vibrato, ABM solid milled brass roller bridge, Hipshot open backed locking tuners.  Strap pegs of choice.  Stop tail or trapeze set up of similar quality available at no extra charge (gold hardware at $100).  5-Ply B/W/B/W/B pickguard available (add $75).

Finishes:  Poly finish standard and available in a range of colors at little to no extra cost, except natural (add $200).

Nitro finish (add $1000).

Base price: $3999